15 Years Factory wholesale NXK0482-1600-3P Brushless motor for vacuum cleaner to South Africa Manufacturers
Short Description:
15 Years Factory wholesale NXK0482-1600-3P Brushless motor for vacuum cleaner to South Africa Manufacturers Detail:
Specifications:
Voltage: 220V, 50Hz/60Hz
Fan System: side pipe type, 2 stage
Diameter:φ145mm
Weight: 2.65kg
Insulation: F
Feature: High efficiency, energy saving, environmental protection, long life, no sparkle.
Typical Performance
Sealed Orifice |
Orifice Loading |
Orifice Loading |
Max. Eff. |
|
Orifice (mm) |
0 |
50 |
23 |
16 |
Vacuum Pressure (kPa) |
30.49 |
2.33 |
8.14 |
15.15 |
Air Flow (m3/min) |
0 |
3.272 |
2.718 |
1.846 |
Air watt (Watt) |
0 |
126.96 |
368.67 |
466.39 |
Speed (rpm) |
27140 |
20880 |
20400 |
21600 |
Input Power (Watt) |
1179.36 |
1260.32 |
1225.76 |
1274.68 |
Efficiency (%) |
0 |
10.06 |
30.06 |
36.60 |
Outline Drawing
Product detail pictures:
We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for 15 Years Factory wholesale NXK0482-1600-3P Brushless motor for vacuum cleaner to South Africa Manufacturers, The product will supply to all over the world, such as: Lesotho , Mexico , Turkmenistan , We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market. We are willing to cooperate with business friends from at home and abroad and create a great future together.
Audio volume warming. KK2.1 1.9S1 Steveis LD-Power 1306-3100KV 1300mah 7.4V 2S 25-50C 5030 props KHT6A V2 TX RX, scratch built 14g frame from a TrueValue Hardware wood yardstick $0.79. 6 minutes of flight hammering it full throttle for 1-2 seconds out every 20. On board camera SJ1000 with front metal face cover removed (the SJ1000 is heavier than the onboard FPV equipment will be), swapped out lens. Ecalc.com puts simular mfrs motors top speed setups at around 32mph. To keep the weight down trimming of motor and ESC wires and connectors are required. I used 2 small brass washers for distribution, and covered them with heat shrink. To keep it under 250g, I’ll have to make a pit stop and load a fresh battery once every 6-10 minutes or so. In USA I’ll plan on using FPV FT951 5.8GHz Video Transmitter 25mW Full FCC and CE Certification found at hobbyking.com. Some people are running similar 1306-3100KV motors such as DYS, RC Timer on 3S 11.1V for additional speed and power, don’t know if these can run on 3S 11.1V, I’m thinking they can.
By Alexandra 2015-11-30 13:28
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Christine 2016-9-29 19:19