Discount wholesale Brushless motor for vacuum cleaner in dry & wet circumstance for Los Angeles Factory

Specifications:

Voltage: 220V, 50Hz/60Hz

Fan System: side pipe type, two layer

Diameter:φ145mm

Weight: 2.46kg

Insulation: E

Feature: High efficiency, energy saving, environmental friendly, long life, no sparkle.

Typical Performance

Outline Drawing

Builder Ruudi
Rebuilt on Gilera runner SP50
battery: pingbattery 48v 30Ah
motor:turnigy bldc c80-100
controller:72V 1500W 12fet
top speed 44km/h
range on one charge about 20km

—————————————————
Question:
Could you make a fid how to convert a scootr to Electric? Like Maczek Mrok i want to refit my scooter to electric but i want as much accellaration as possible so i’m thinking of a 72V system but i got no idea of what motor i can use or need to use. Dont know what i need in electronics like modulators or stuff like that.
The scooter weights about 100KG (Aprillia SR50) so plz heelp a fellow scooter freak out here

Answers from the builder:
No I can not make video about converting the scooter.
I could not find info about Maczek Mrok scooter conversion.
If you want very good acceleration then maybe you should choose some 10kw motor.
Higher voltage gives you better top speed. For acceleration you need big Current and lithium batteries that can give you enough amperes that every ebike battery cannot handle.
If you choose a motor then ask the seller what controller suits this motor. For example if you buy here https://kellycontroller.com/mars-1003etek-comparable-brush-type-pm-dc-motor-p-936.html then they reccomend suitable controller. Buy the way I have no experience with that motor but If I could would like to try with that motor and controller combo.
I suggest to find builds that have used these powerful motors and ask advice. For example https://www.youtube.com/watch?v=-P21JeehYZA&list=UUJvBKnIPDtRzKpVa_2srVrA this is called elinta e-force and I think you would like it but it seems like this vehicle is now more like in the motorcycle speed and power range.
I like Aprilia SR50 looks but you will have problems fitting the batteries on it because batteries should be as low as possible and sr50 does not have much space under the legroom.

—————————————————
Question:
Its hard to make this conversion, what I must to do to convert minarelli scooter to electric, and how much cost this operation.

Answers from the builder:
No it is not hard if you know a little about electronics, mechanics and metal work. And if you do not know then you learn or find people who help. ES forum endless-sphere.com/forums is the biggest information source for electric bike or motorbike building. There is a little more info about my build https://endless-sphere.com/forums/viewtopic.php?f=12&t=44801
Cost depends on your goals. I wanted silent cheap ride to work and back max speed is 45km/h acceleration is not as good as original gas engine but I am not racing in traffic anyway. I think 2000€ (for electric parts) would be enough to buy good Lithium battery, motor, motor controller and the rest of the parts.
If you want to burn rear tires or make it faster then gas engined scooter (witch is possible
nowadays) then you need more expensive batteries, more powerful motor and controller.

—————————————————

Question:
What kind of motor is that?

Answers from the builder:
The motor in this video is RC brushless motor Turnigy 80100-kv130 meant to work on electric RC planes. It is no longer available from hobbyking.com but there are some resources from china where you could get it. And there are already better motors available. This motor failed I have already put other motor to the other location instead of clutch bell on the rear reducer input shaft.

—————————————————