Original Factory NXK0482-800 brushless motor for vacuum cleaner for Mumbai Manufacturer
Short Description:
Original Factory NXK0482-800 brushless motor for vacuum cleaner for Mumbai Manufacturer Detail:
Specifications:
Voltage: 220V, 50Hz/60Hz
Fan System: tangential by pass, 2 stage
Diameter:φ145mm
Weight: 2.23kg
Insulation: F
Feature: Brushless, High efficiency, energy saving, environmental protection, long life.
Typical Performance
|
Sealed Orifice |
Orifice Loading |
Orifice Loading |
Max. Eff. |
|
| Orifice (mm) |
0 |
50 |
23 |
16 |
| Vacuum Pressure (kPa) |
21.89 |
1.57 |
5.34 |
9.73 |
| Air Flow (m3/min) |
0 |
2.645 |
2.167 |
1.498 |
| Air watt (Watt) |
0 |
69.42 |
192.48 |
242.37 |
| Speed (rpm) |
- |
- |
- |
- |
| Input Power (Watt) |
679.83 |
761.43 |
760.63 |
759.90 |
| Efficiency (%) |
0 |
9.10 |
25.30 |
31.90 |
Outline Drawing
Product detail pictures:
We've been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Original Factory NXK0482-800 brushless motor for vacuum cleaner for Mumbai Manufacturer, The product will supply to all over the world, such as: Greenland , Mozambique , Kenya , It using the world's leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we'll be happy to serve you.
Be sure to check us out on Facebook at: https://www.facebook.com/RamblinAroundTV
I managed to get the pulley swap done yesterday and we took it out for a little test drive. I decided to leave the engine pulley stock and just swap the transaxle pulley. So, I switched the transaxle pulley from a 9 inch diameter pulley to a 2.5 inch pulley. Then I took up the slack in the old belt, to figure out what length the new belt should be. It turned out that a deck belt from a 40″ Murray works just fine. We still have some carburetor issues to address before we’ll be getting the maximum performance out of it. I also have some modifications that I’m going to make to the spindles and front end. I hope you find this racing mower project interesting…thanks for watching!
Here is the first ESC I built with an Arduino. Visit my website for schematic, Arduino sketch, and other documents download.
https://www.electronhacks.com/2011/10/arduino-electronic-speed-control-esc-1-of-2/
Check out my other ESC projects and videos. 
By Anne 2016-3-08 16:27
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Louis 2016-11-11 13:14
