Personlized Products Brushless motor for vacuum cleaner in dry & wet circumstance Supply to Salt Lake City
Short Description:
Personlized Products Brushless motor for vacuum cleaner in dry & wet circumstance Supply to Salt Lake City Detail:
Specifications:
Voltage: 220V, 50Hz/60Hz
Fan System: side pipe type, two layer
Diameter:φ145mm
Weight: 2.46kg
Insulation: E
Feature: High efficiency, energy saving, environmental friendly, long life, no sparkle.
Typical Performance
Sealed Orifice |
Orifice Loading |
Orifice Loading |
Max. Eff. |
|
Orifice (mm) |
0 |
50 |
23 |
16 |
Vacuum Pressure (kPa) |
30.49 |
2.33 |
8.14 |
15.15 |
Air Flow (m3/min) |
0 |
3.272 |
2.718 |
1.846 |
Air watt (Watt) |
0 |
126.96 |
368.67 |
466.39 |
Speed (rpm) |
27140 |
20880 |
20400 |
21600 |
Input Power (Watt) |
1179.36 |
1260.32 |
1225.76 |
1274.68 |
Efficiency (%) |
0 |
10.06 |
30.06 |
36.60 |
Outline Drawing
Product detail pictures:
We are also specializing in improving the things management and QC method in order that we could retain terrific edge inside the fiercely-competitive small business for Personlized Products Brushless motor for vacuum cleaner in dry & wet circumstance Supply to Salt Lake City, The product will supply to all over the world, such as: French Guiana , Holland , Czech Republic , Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!
I did this pretty basic brushless conversion to my NQD High Wind toy speed boat, to have it quicker and better controllable – the original boat was barely planing and with the crude three-state-control (full forward, full left, full right, off…) not exactly fun to drive.
This setup uses the original axles and props, I just replaced the original 380-size brushed motors for 3000kV brushless outrunners and added a rudder and watercooling. The original 1800mAh NiMH C-cell 7,2V racing pack was replaced by a 2S 3000mAh LiPo.
I also added some LED lights running off of a separate 9V block battery, just for fun, but they are not switched on in this video.
Please note that while this conversion has been satisfactory for me, better results can be achieved with this hull by replacing the twin-motor-setup with a single prop shaft that extends a bit further from the stern, with a powerfull outrunner and an off-center rudder. I did not want to spend that much cash nor time in doing that conversion, I wanted to keep it simple and cheap.
By Sharon 2016-10-25 18:05
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Antonio 2016-9-15 12:57