Top Quality household vacuum cleaner motor NX0355 to Bhutan Factories

Specifications:

Voltage: DC12V~DC24V

Fan System: Though flow, 1-stage

Diameter:φ60mm

Weight: 0.235kg

Insulation: F

Feature: High efficiency, energy saving, environmental protection, small, high speed.

Typical Performance

Outline Drawing

Bosch Condensing Dryers are susceptible to the F03 error when too much lint collects in the sump. This shows how to quickly clean it out for free in under 30 minutes

Go to https://www.walkerasite.com/storm_drone_ff.html to read my full review.

The Storm Drone FF utilizes four powerful 1100kv brushless motors with 9 x 4.7 inch propellers for maximum efficiency. Each propeller is balanced and secured to the motors at the factor to ensure a vibration free quad copter during flight. The motor arms are made from light weight durable plastic. For orientation during flight, the two front plastic motor arms are black, while the two rear plastic motor arms are white.
Each motor arm has a LED light strip and 10A ESC (speed controller) pre-fitted at the factory. The two black arms have white LED light strips, and the white arms red LED light strips. The lights are not visible during daytime, but will help with orientation during night flight. Plastic pins for the yellow sponge balls screws into metal brackets below the motor mounts. The balls acts as a landing platform for the Storm Drone FF. This layout increase the landing surface which is better that other quad copters which have landing skids like a helicopter.
The heart of the Storm Drone is the 6-axis FF Gyro board (V1.1 Black Color). The gyro is constantly monitoring all the axis during flight which makes the Storm Drone FF very stable. Eight screws secure the gyro board onto four plastic spacers inside the center frame, and eliminates unwanted vibration for the sensitive gyro. A Velcro battery strap below the center frame is used to fasten the supplied 11.1V 2200 mAh LiPo battery to the Storm Drone.
A standard 1/4″ camera bolt is mounted on top of the center frame. Simply screw the camera onto the Storm Drone FF, and you are ready to go. The GOPRO camera mount (not supplied with the kit) can be mounted directly onto the Drone. Simply remove the 1/4″ bolt bracket and use double sided tape to stick the GOPRO camera mount onto the center frame. The camera can be mounted on the bottom of the Drone, but then you have to move battery strap of the LiPo to the top of the center frame.
The supplied transparent canopy is held in position by two plastic pins on the center frame. You can customize the transparent canopy by painting it with your favorite color scheme. The overall design of the Storm Drone FF is very good and user friendly to assemble. A lot of thought went into the Drone design to make it very stable for sport flying and an excellent vibration free platform for aerial filming. Very nice HELIPAL…